How to Configure TP-Link N router as a wireless Access Point? This video will explain how to use your TP-Link N router as an access point.
Setting up a wireless network (WI-FI). Go to the section "Wireless" - "Wireless Settings". Here we set the following parameters: Choose "Wireless Status" - "Enable". Set "Radio Mode" to "Access Point".
Turn them into wireless AP's (access points) of course! Increase your wireless coverage, look cool! First thing's first, set up DHCP on your main router. For me it's the BEFSX41. Set your DHCP range, for example 192.168.0.150-199 giving you some room for wireless devices.

What You'll Need. MikroTik router. Computer with Ethernet port (Suggested), but configuration over WiFi works too, if the device has a WiFi access point built in.
Setup with the web GUI. About the Country Code. Troubleshooting. Using the command line. Enabling a Wi-Fi access point on OpenWrt. Devices with Ethernet ports have Wi-Fi turned off by default for security reasons. This page contains basic settings to enable Wi-Fi.

Tengda wireless router Wireless Configuration-Wireless Access Point AP). Network Mode: select one mode based on the wireless client type. The default value is 11b/g/n hybrid mode.
5. Select the working mode as Access Point Mode and click SAVE.You can refer to How to log into the web-based interface of the MERCUSYS Wireless Router. 3. Go to Network > LAN Settings Select Manual and put in the LAN IP address for Mercusys router.
router access point mode diagram network setup. Disable DHCP to Prevent IP Address Chaos.Match Wireless Settings for Seamless Roaming. Same SSID/password: Devices auto-switch between routers (ideal for streaming).